The Clack WS 1.5 CI control valve assembly is characterized by simplicity, reliability and high performance. The use of this element makes the process of water purification fast, high-quality and completely independent of the human factor.
This valve is used to automatically switch operating modes of bed filters (iron removal, sediment, carbon), as well as softening filters. Recommended for use on filter housings up to 24″ in diameter.
When programming the valve as a softener, regeneration is possible in two directions (top-down and bottom-up), but if it is programmed as a filter, then regeneration is possible only in the top-down direction, or only backwashing.
Features of the Clack WS 1.5 CI valve:
- several operating modes (immediate and delayed regeneration based on a counter signal, as well as delayed regeneration using a timer);
- double backwash;
- possibility of programming the time of regeneration modes;
- forced start of regeneration and the ability to select its type (up or down);
- filling the reagent tank with softened water;
- salt level indicator;
- ease of service due to simple design and easy access;
- storing data in independent memory;
- 24 hour time.
Country of origin: USA.
